updated
17/04/2009
+44 (0)1273 843749
+44 (0)7976 312058 (mobile)
art@spitfireart.com
the official manufacturers of the BRA CX3 MG3 & CV3 cycle cars
three Wheelers...the inspiration is unashamedly Morgan!
www.BRA-Cyclecars.com
www.veetwintrikes.com
www.morganreplicas.com
www.aero-cyclecars.com
New Beetle-back chassis
and vintage looking 19 inch wheels and tyres!
KIT PRICES & CONTENTS
We offer three Aero MG3 kits at present:
1) MG3 KIT 001
2) MG3 KIT 002
3) MG3 KIT 003
Explanations:
Traditionally these kits/cars, and many other kit manufacturers have relied upon production car front suspension and braking systems mainly Ford Cortina/Ford Sierra and some, Triumph Herald/Spitfire. Ours in the past have relied solely on used/reconditioned Ford Cortina items
In latter years, as Ford Cortina donor cars have all but disappeared, several manufacturers have made aluminium alloy uprights.
Our MG3 KIT 001 uses reconditioned Ford Cortina front suspension/braking systems. We can supply at additional cost our new aluminium alloy suspension system and alloy brake system, together with 6mm thick discs. This system combined with our alloy 19 inch wheels and Avon tyre combination, saves a tremendous unsprung weight. This whole system is not just lighter, but looks far more vintage, retaining motorcycle light weight and feel.
1) MG3 Kit 001 requires the purchaser to acquire/possess a donor bike (or separate items) plus other items in general. Please read the list very carefully. This kit includes a pair of reconditioned cast steel Ford Cortina suspension uprights/calipers/hubs/discs. It does not include our new alloy suspension/brake system or our new 19 inch alloy motorcycle wheel and tyre combination.
2) MG3 Kit 002 includes just about every item that you will require to complete an Aero Cycle Cars MG3 car. This includes a completely rebuilt, reconditioned drive train(by Motori di Marino ), alloy front suspension/braking system, and 19 inch alloy motor cycle wheels and tyres. Please read the list very carefully.
3) MG3 003 includes everything in Full Kit MG3 KIT 002, less the items that you will be supplying from your existing or to be acquired donor bike. Please read the list very carefully.
Aero MG3 KIT 001
Contents of MG3 Kit 001
Propshaft.
Rear propshaft bearing.
Gear linkage with spherical
joints.
Gear change linkage.
One piece aluminium floor.
Front suspension ball
joints.
Stainless steel fuel tank.
Upper steering column.
Lower steering column.
Stainless steel exhaust
system.
Stainless steel brake hose
kit (front).
Front springs (pair).
Front shock absorbers
(pair).
Steering rack.
Wiring loom.
7" headlights with
sidelights (pair).
MSVA approved wing mirrors
(pair).
Aeroscreens (pair).
4 chrome bonnet catches.
4 tubes of body adhesive.
GRP nose cone, scuttle, rear
deck, 2 mud guards.
Aluminium body sides, bonnet
halves and pre-cut tunnel/deck covers.
Powder coated chassis.
Powder coated pedal box
assembly.
Powder coated mud guard
stays.
Fasteners,
nuts/bolts/rivets.
Stainless steel front
suspension brace bar.
Powder coated upper
wishbones (pair).
Powder coated lower
wishbones (pair).
Three 15" wire spoked wheels, powder coated, silver (barrel-back), two only for
beetle-back.
Hub
adaptors, nuts, and hexagonal spinners
Three cross ply tyres to suit above wheels (barrel-back), two only for
beetle-back.
Pair
of fully reconditioned (as new) Ford Cortina front suspension uprights and
hubs complete with new bearings, calipers discs and brake pads.
Stainless steel hinge.
Plywood
Rear tail panel (barrelback only)
Aero MG3 KIT 001 price: £5995
Aero MG3 KIT 002
Contents of MG3 Kit 002
Dual brake
master cylinder.
12" vinyl steering wheel.
Steering wheel mounting boss
Alloy steering wheel spacer
Reversing gearbox.
Reversing gearbox propshaft.
Rear propshaft bearing.
Rebuilt engine/gearbox/bevel
drive.
Gear change linkage.
Powder coated swing arm.
Swing arm pivot bolts (pair)
Swing arm bearings (pair)
Swing arm oil seal (pair).
Alloy suspension uprights,
alloy brake calipers, brake discs, alloy caliper bracket (pair).
Alloy 19 inch wheels fitted
with Avon SM2 tyres (pair).
Rear wheel and tyre.
Rear brake caliper and
bracket.
Rear handbrake caliper.
Rear handbrake cable.
2 seat belts.
Torpedo indicators (pair).
Handbrake lever.
One piece aluminium floor.
Front suspension ball
joints.
Stainless steel fuel tank.
Upper steering column.
Lower steering column.
Stainless steel exhaust
system.
Stainless steel brake hose
kit (front).
Stainless steel brake hose
kit (rear).
Front springs (pair).
Front shock absorbers
(pair).
Steering rack.
Wiring loom.
7" headlights with
sidelights (pair).
MSVA approved wing mirrors
(pair).
Aeroscreens (pair).
4 chrome bonnet catches.
4 tubes of body adhesive.
Alloy steering rack clamps
(pair).
Fuel pump.
Monza fuel tank filler cap.
Rear shock absorbers (pair).
Clutch/speedo/tacho cables.
Rear lights (pair).
Rear lighting board (barrelback
only).
GRP nose cone, scuttle, rear
deck, 2 mud guards.
Aluminium body sides and
pre-cut tunnel/deck covers.
Powder coated chassis.
Powder coated pedal box
assembly.
Powder coated mud guard
stays.
Dashboard.
Speedometer.
Rev counter.
Carpets (pair).
Tonneau cover.
Bench seat set.
Fasteners,
nuts/bolts/rivets.
Switches/dashboard lights.
Rectifier.
Voltage regulator.
Aero MG3 KIT 002 price: £13950
Aero MG3 KIT 003
Contents of MG3 Kit 003
Dual brake
master cylinder.
12" vinyl steering wheel.
Steering wheel mounting boss
Alloy steering wheel spacer
Alloy steering wheel spacer.
Reversing gearbox.
Reversing gearbox propshaft.
Rear propshaft bearing.
Rebuilt engine/gearbox/bevel
drive. *
Gear change linkage.
Powder coated swing arm.*
Swing arm pivot bolts (pair)*
Swing arm bearings (pair)*
Swing arm oil seal (pair).*
Alloy suspension uprights,
alloy brake calipers, brake discs, alloy caliper bracket (pair).
Alloy 19 inch wheels fitted
with Avon SM2 tyres (pair).
Rear wheel and tyre.*
Rear brake caliper and
bracket.*
Rear handbrake caliper.*
Rear handbrake cable.*
2 seat belts.
Torpedo indicators (pair).
Handbrake lever.
One piece aluminium floor.
Front suspension ball
joints.
Stainless steel fuel tank.
Upper steering column.
Lower steering column.
Stainless steel exhaust
system.
Stainless steel brake hose
kit (front).
Stainless steel brake hose
kit (rear).
Front springs (pair).
Front shock absorbers
(pair).
Steering rack.
Wiring loom.
7" headlights with
sidelights (pair).
MSVA approved wing mirrors
(pair).
Aeroscreens (pair).
4 chrome bonnet catches.
4 tubes of body adhesive.
Alloy steering rack clamps
(pair).
Fuel pump.
Monza fuel tank filler cap.
Rear shock absorbers (pair).
Clutch/speedo/tacho cables.
Rear lights (pair).
Rear lighting board (barrelback
only).
GRP nose cone, scuttle, rear
deck, 2 mud guards.
Aluminium body sides and
pre-cut tunnel/deck covers.
Powder coated chassis.
Powder coated pedal box
assembly.
Powder coated mud guard
stays.
Dashboard.
Speedometer.
Rev counter.
Carpets (pair).
Tonneau cover.
Bench seat set.
Fasteners,
nuts/bolts/rivets.
Switches/dashboard lights.
Rectifier.*
Voltage regulator.*
Items shown asterisked * are deleted from this kit (you provide these)
Aero MG KIT 003 price = £10150
Remember, we supply and use new components only (excepting our refurbished/rebuilt engines/drivetrains), nothing is used.
We reserve the right to increase prices even once quoted, should our suppliers do likewise.
UK VAT at 17.5% is added to all prices.
The stable of the BRA
Cyclecar!
+44 (0)1273 843749
+44 (0)7976 312058 (mobile)
art@spitfireart.com